View Single Post
  #3   Spotlight this post!  
Unread 15-10-2016, 20:43
carpedav000's Avatar
carpedav000 carpedav000 is offline
Studenting is hard, but worth it!
AKA: David Carpenter
no team (Jerry-Rigg school of DuctTapeology)
Team Role: Mechanical
 
Join Date: Jan 2015
Rookie Year: 2010
Location: Greenwood, IN
Posts: 462
carpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant futurecarpedav000 has a brilliant future
Re: 5010 T-Shirt Launcher Prototype

Quote:
Originally Posted by GeeTwo View Post
If you're planning to use it during basketball season, either you're using too small of a solenoid valve or you're going to have shirts hitting the roof of any normal-sized gym. We launched a t-shirt over the top of our football stadium last night with less than 60psi in the secondary tank, using a 3/4" diameter solenoid valve.
Barrel length and cylinder seal could also be effecting their ranges. If the solenoid is the issue, though, longer barrels should do the trick
__________________
It isn't shiny enough.
Reply With Quote