When we try to deploy our robot code, it says "Build Successful". In the FRC Driver Station, however, says there is no robot code.
-Communication light is Red on the roborio and the driver station
Code can be found:
https://github.com/Team-5243/Basketb...e/master/robot
Build Log:
Buildfile: C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build.xml
Trying to override old definition of task classloader
clean:
[delete] Deleting directory C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build
[delete] Deleting directory C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\dist
compile:
[mkdir] Created dir: C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build
[echo] [athena-compile] Compiling src with classpath=C:\Users\Robotics1/wpilib/java/current/lib/WPILib.jar:C:\Users\Robotics1/wpilib/java/current/lib/NetworkTables.jar: to build
[javac] Compiling 7 source files to C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build
jar:
[echo] [athena-jar] Making jar dist/FRCUserProgram.jar.
[mkdir] Created dir: C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\dist
[mkdir] Created dir: C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build\jars
[echo] [athena-jar] Copying jars from C:\Users\Robotics1/wpilib/java/current/lib/WPILib.jar:C:\Users\Robotics1/wpilib/java/current/lib/NetworkTables.jar: to build/jars.
[copy] Copying 2 files to C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\build\jars
[jar] Building jar: C:\Users\Robotics1\Documents\FRCRobotics\2015-16\BasketBall\dist\FRCUserProgram.jar
get-target-ip:
[echo] Trying Target: roboRIO-5243-FRC.local
[echo] roboRIO found via mDNS
dependencies:
[echo] roboRIO image version validated
[echo] Checking for JRE. If this fails install the JRE using these instructions:
https://wpilib.screenstepslive.com/s...ller-java-only
[sshexec] Connecting to roboRIO-5243-FRC.local:22
[sshexec] cmd : test -d /usr/local/frc/JRE
deploy:
[echo] [athena-deploy] Copying code over.
[scp] Connecting to roboRIO-5243-FRC.local:22
[scp] done.
[sshexec] Connecting to roboRIO-5243-FRC.local:22
[sshexec] cmd : killall -q netconsole-host || :
[scp] Connecting to roboRIO-5243-FRC.local:22
[scp] done.
[echo] [athena-deploy] Starting program.
[sshexec] Connecting to roboRIO-5243-FRC.local:22
[sshexec] cmd : . /etc/profile.d/natinst-path.sh; /usr/local/frc/bin/frcKillRobot.sh -t -r;
[sshexec] Connecting to roboRIO-5243-FRC.local:22
[sshexec] cmd : sync
BUILD SUCCESSFUL
Total time: 9 seconds
Things we have tried:
--Updating Roborio firmware
--Tried with multiple roborios
--Tried with last year's code (worked last year, also included more sensor code, no change)
--Tried redeploying easily 10 times
After reading Ozrien's post in
https://www.chiefdelphi.com/forums/s...hreadid=141652
--we tried to put a joystick in our last port (and in both ports). Did nothing.