|
Re: Would this Encoder work? and Encoder Recommendations
We have also used shaft couplers to connect this sort of encoder to a drive shaft. If you are connecting a 1/4" stem to a 1/2" shaft, you will need a significant filler. A 5/16" nut takes a 1/2" wrench, so that'll get you most of the way there; a bit of tubing can do the rest.
__________________
If you can't find time to do it right, how are you going to find time to do it over?
If you don't pass it on, it never happened.
Robots are great, but inspiration is the reason we're here.
Friends don't let friends use master links.
|