View Single Post
  #2   Spotlight this post!  
Unread 15-11-2016, 07:00
Ari423's Avatar
Ari423 Ari423 is offline
LabVIEW aficionado and robot addict
AKA: The guy with the yellow hat
FRC #5987 (Galaxia)
Team Role: Mentor
 
Join Date: Mar 2015
Rookie Year: 2012
Location: Haifa, Israel
Posts: 540
Ari423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant future
Re: pic: Average Winch Innards

Quote:
Originally Posted by Jean Tenca View Post
Very cool. I'm curious, is there anything special with the wiring for this? How do you accommodate the motor rotating so many times? I've seen a few robots do motors in rollers in the past, but I've always been unsure as to how exactly they wire them.
Richard can correct me if I'm wrong, but from Mike's picture it looks like the CIM is mounted and the spool rotates around the CIM. Not shown in the original picture is a large gear that fits on the end of the VP and bolts to the side of the spool and spins it. If this is right, then there is no need to worry about the CIM wires rotating.
__________________
2017-present: Mentor FRC 5987
2017-present: CSA for FIRST in Israel
2012-2016: Member FRC 423
2013: Programmer
2014: Head Programmer, Wiring
2015: Head Programmer, Wiring
2016: Captain, Head Programmer, Wiring, Manipulator, Chassis, CAD, Business, Outreach (basically everything)


Reply With Quote