|
Re: Recommended Method to hold Aluminum Extrusion in Gantry Style Mill
Attached is what we are experimenting with this offseason. It was precision-made using a manual mill. It can hold extrusions 10" - 42", and can rotate 360 degrees freely. We have worked out most of the chatter in it, but there is still a little bit. I can get more info on it Thursday, if you have questions on how it was made.
__________________
Drive Coach, 1885 (2007-present)
CAD Library Updated 5/1/16 - 2016 Curie/Carver Industrial Design Winner
GitHub |