View Single Post
  #13   Spotlight this post!  
Unread 21-11-2016, 00:31
Maxwell777's Avatar
Maxwell777 Maxwell777 is offline
Is allowed to touch stuff now
AKA: Jackson Gray
FRC #0842 (Falcon Robotics)
Team Role: Programmer
 
Join Date: Aug 2013
Rookie Year: 2014
Location: Phoenix, AZ
Posts: 72
Maxwell777 has a spectacular aura aboutMaxwell777 has a spectacular aura aboutMaxwell777 has a spectacular aura about
Re: Rate my Talon SRX breakout (EagleCAD)

Quote:
Originally Posted by asid61 View Post
I just noticed this- do you have adequate clearance between vias on the 0.05" pitch header?
According to OSH's design rules, everything passes DRC so I hope so. I was kinda worried about that myself for a bit, but like I said the DRC don't care so I guess I don't.

On a somewhat related note, I was thinking about using some sort of epoxy or other goopy compound to seal all the parts on the board, particularly the .05" header, from metal chips and any other potential source of shorts. Know of anything that would be fairly easy to apply and non-conductive?
__________________
But why?

Last edited by Maxwell777 : 21-11-2016 at 16:17. Reason: n't
Reply With Quote