21-11-2016, 09:41
|
 |
Mad Scientist
AKA: Me
 FRC #2040 (DERT) Team Role: Engineer
|
|
Join Date: Apr 2005
Rookie Year: 2003
Location: Peoria, IL
Posts: 1,944
|
|
|
Re: Rate my Talon SRX breakout (EagleCAD)
Quote:
Originally Posted by Maxwell777
According to OSH's design rules, everything passes DRC so I hope so. I was kinda worried about that myself for a bit, but like I said the DRC don't care so I guess I do.
On a somewhat related note, I was thinking about using some sort of epoxy or other goopy compound to seal all the parts on the board, particularly the .05" header, from metal chips and any other potential source of shorts. Know of anything that would be fairly easy to apply and non-conductive?
|
I've used This before and it works well. I do HIGHLY recommend that you use it in a WELL ventilated area.
A low temp drying oven is the recommended way to cure this.
__________________
___________________
"We are not now that strength which in old days moved earth and heaven; that which we are, we are;
One equal temper of heroic hearts, Made weak by time and fate, but strong in will
To strive, to seek, to find, and not to yield. "- Tennyson, Ulysses
|