View Single Post
  #22   Spotlight this post!  
Unread 24-11-2016, 16:15
Ari423's Avatar
Ari423 Ari423 is offline
LabVIEW aficionado and robot addict
AKA: The guy with the yellow hat
FRC #5987 (Galaxia)
Team Role: Mentor
 
Join Date: Mar 2015
Rookie Year: 2012
Location: Haifa, Israel
Posts: 540
Ari423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant futureAri423 has a brilliant future
Re: Talon SRX Motor Controller Problem

Quote:
Originally Posted by Bkeeneykid View Post
Well for one, that's not FRC Legal. *Standard warning about 2016 rules may not apply to 2017* See rule R70:

Quote:
Each Jaguar or Talon SRX must be controlled with signal inputs sourced from the roboRIO and passed via either a PWM (wired per R68) or CAN-bus (either directly or daisy-chained via another CAN-bus device) signal, but both shall not be wired simultaneously on the same device. If the CAN-bus configuration is used, the firmware on the device must be updated to at least the following versions:
You can only either directly connect to the roboRIO or daisy chain through another device.
Not suggesting that a star topology is the better way to go, but the way I read R70 it would be legal. Each Talon is connected directly to the roboRIO, and no Talon has both PWM and CAN running simultaneously. The rule never says that the tree can't branch out, only that each "leaf" (Talon) must be connected to the "roots" (roboRIO) either directly or through a daisy-chain. Let me say it again: not better, but legal (according to me, who has absolutely no bearing in what is actually considered legal)
__________________
2017-present: Mentor FRC 5987
2017-present: CSA for FIRST in Israel
2012-2016: Member FRC 423
2013: Programmer
2014: Head Programmer, Wiring
2015: Head Programmer, Wiring
2016: Captain, Head Programmer, Wiring, Manipulator, Chassis, CAD, Business, Outreach (basically everything)


Reply With Quote