21-12-2016, 01:22
|
 |
no bag, vex only, final destination
AKA: Pinecone
 FRC #0228 (GUS Robotics); FRC #2170 (Titanium Tomahawks) Team Role: Mentor
|
|
Join Date: Dec 2008
Rookie Year: 2006
Location: Glastonbury, CT
Posts: 7,581
|
|
|
Re: Belts 9mm or 15mm?
Quote:
Originally Posted by mrnoble
Sorry, is the 24T small enough to be used inside .062" 2x1 or 2x2 tubing? I can't remember.
|
Only if you don't rivet or bolt to the top or bottom. I'd recommend 3x1.5 if you add a counterbore to your pulley for the bearing clearance or 3x2 if you do not. This gives you plenty of room for hardware so you never have to worry about it. You can probably do 2.5" tubing if you can find it?
__________________
Mentor / Drive Coach: 228 (2016-?)
...2016 Waterbury SFs (with 3314, 3719), RIDE #2 Seed / Winners (with 1058, 6153), Carver QFs (with 503, 359, 4607)
Mentor / Consultant Person: 2170 (2017-?)
---
College Mentor: 2791 (2010-2015)
...2015 TVR Motorola Quality, FLR GM Industrial Design
...2014 FLR Motorola Quality / SFs (with 341, 4930)
...2013 BAE Motorola Quality, WPI Regional #1 Seed / Delphi Excellence in Engineering / Finalists (with 20, 3182)
...2012 BAE Imagery / Finalists (with 1519, 885), CT Xerox Creativity / SFs (with 2168, 118)
Student: 1714 (2009) - 2009 Minnesota 10,000 Lakes Regional Winners (with 2826, 2470)
2791 Build Season Photo Gallery - Look here for mechanism photos My Robotics Blog (Updated April 11 2014)
|