|
Re: What do I need to do to change the team number to run two bots at the same time
The simple thing to do is run the robot radio as an access point and assign different SSIDs to the robots & robot radios. Then they are on separate networks and you can use the same IPs ETC
The other option assumes you running DHCP & mDNS. Go to the Roborio webdash board and change change the host name from roborio-TEAM-frc to roborio-TEAM-frc where TEAM is the new team number. You don't have to reflash the roborio or change anything in program.
__________________
If you don't know what you should hook up then you should read a data sheet
Last edited by FrankJ : 06-01-2017 at 09:05.
|