Thread: New size/bumper rules that every team should know
View Single Post
  #2   Spotlight this post!  
Unread 07-01-2017, 15:29
NShep98's Avatar
NShep98 NShep98 is online now
Registered User
AKA: Nathan Shepherd
FRC #2079 (4H ALARM Robotics)
Team Role: Mechanical
  
Join Date: Oct 2015
Rookie Year: 2015
Location: Franklin, MA
Posts: 256
NShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud ofNShep98 has much to be proud of
Re: New size/bumper rules that every team should know
Quote:
R22. ROBOTS are required to use BUMPERS to protect all outside corners of the FRAME
PERIMETER. For adequate protection, at least 6 in. (~16 cm) of BUMPER must be placed on
each side of each outside corner (see Figure 8-1). If a FRAME PERIMETER side is shorter than
6 in. (~16 cm)
This is reduced from 2016's 8 inches.
__________________


FRC 2079 - 4H ALARM Robotics 2015 - 2017

FLL 2011, 2013
Reply With Quote