|
Re: Gears on the floor?
Quote:
Originally Posted by TroyCDH
2450 did some CAD modeling to pick up the gear. I wish the gear had a large chamfer to get a "dustpan" under it while laying flat. Fairly sharp corner on carpet that probably cant be scooped up.
Ideas welcomed.
|
We actually had luck with putting the intake roller on the bottom (with the polycarb sheet above) rather than on top or outwards. Just make sure the tread or whatever you line your roller with is extra grippy and the roller doesnt have a massive diameter(ours were about 1"). Although, as far as tread is concerned, I think wedgetop worked fine for us....
__________________
2014: FRC 2169 scouting/spirit, FTC 7897 Mechanical

2015: FRC 2169 Mechanical/CAD

2016: FRC 2169 Mechanical/CAD
2017: FRC 2169 Head of Mechanical
Last edited by BumblingBuilder : 13-01-2017 at 01:22.
|