Quote:
Originally Posted by TroyCDH
2450 did some CAD modeling to pick up the gear. I wish the gear had a large chamfer to get a "dustpan" under it while laying flat. Fairly sharp corner on carpet that probably cant be scooped up.
Ideas welcomed.
|
We put the gear on a flat surface, and saw a very tiny space between the gear teeth and the ground. So while the gear doesn't have a large chamfer, it may have a small one. Using a very thin pan worked for us, but sometimes it does get jammed so alternatives are welcome.
Quote:
Originally Posted by BumblingBuilder
We actually had luck with putting the intake roller on the bottom (with the polycarb sheet above) rather than on top or outwards.
|
How do the gears go in then? Is the whole thing tilted downwards?