|
Re: Well, this is getting a bit old, but here is round 3
Shot in the dark here... Have you checked whether Windows Firewall is disabled? That is strongly recommended. If you absolutely can't/won't disabled it, you can allow the NI mDNS Responder application through the firewall.
Quote:
Originally Posted by frodobaggins05
Try installing labview and using that.Roborio and Labview are both made by National Instruments and are made for each other
|
No. Just no. The RoboRio was made by NI for FRC. It was made to support LabView, but most certainly does not require it. FIRST/WPI/et al. work in consultation with NI to get the C++/Java versions working equally as well.
__________________
Student:
<04: FRC0213> <05-08: FRC1373>
Mentor:
<09-10: FRC0809> <11-12: FRC3555> <12-14: FRC0073> <15-??: FRC3181>
Volunteer:
<FTAA> <CSA> <Defense Coordinator> <Scorekeeper> <Robot Inspector> <Official Scorer>
2016 Tour:
CTWAT [DefCoord] > Pittsburgh[Mentor/DefCoord] > TVR[FTAA] > FLR[CSA] > NE DCMP[CSA] > CMP[CSA]
Last edited by Fletch1373 : 14-01-2017 at 14:58.
|