|
Re: Comp. tools
Wrenches and drivers of every size you have on the robot is CRUCIAL. Never go to a competition without at least one for each size.
Cutting tools have understated importance. Bring a sawzall (reciprocating saw) for the 'fine' adjustments you will inevitably have to make.
A good cordless drill set is a must, along with some clamps to hold your work down.
You also want basic electrical supplies. Soldering iron, heat gun, heat shrink, electrical tape, wire cutters/strippers, and plenty of replacement connections.
Power strips are useful for everyone too.
These are the basics, but you probably will need more depending on how you built the robot.
__________________
Cunningham's Law: The best way to get the right answer on the Internet is not to ask a question, it's to post the wrong answer.
Last edited by Philip Arola : 16-01-2017 at 12:53.
|