View Single Post
  #9   Spotlight this post!  
Unread 17-01-2017, 13:17
krtanjek's Avatar
krtanjek krtanjek is offline
Registered User
AKA: Donnie Krtanjek
FRC #0225 (TechFire 225)
Team Role: Mentor
 
Join Date: Sep 2014
Rookie Year: 2011
Location: York PA
Posts: 31
krtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud ofkrtanjek has much to be proud of
Re: At What Point Does Your Team Get Your Robot Anodized?

We anodized for the first time last year, we just anodized everything we had and some extra stock as well. if we had to cut it we cut it and dealt with it by using a marker to mark up the edges.

As we had to replace parts we used anodized parts, but if we didn't have any we just dealt with it. Battle wounds we would say.

One warning, if you are welding do your welding prior to anodizing, if not you will need to sand off the anodized layer before welding or you will not be able to weld in that area. Corners are especially hard.

Thankfully we have a sponsor that is open 24 hours a day and we can drop material off anytime and they will get it back to us in 24-36 hours depending on how long or how much we drop off.
Reply With Quote