Quote:
Originally Posted by Mark McLeod
Try this sequence: - Plug in camera, power up roboRIO & radio
- On the PC start the Driver Station
- Wait for Communications and Robot Code to go green
- Wait for camera 0 to appear as a camera selection (it will take a minute)
- After selecting camera 0, if the image remains blank, try hitting the Reset button on the roboRIO (or use the Driver Station Diagnostics tab to choose Restart Robot Code)
- Wait for everything to come back
- Wait a couple of minutes more for an image to appear.
|
After doing all this, it still says, "No Camera Selection"