|
Re: Intake Conveyor Ideal Speed
Quote:
Originally Posted by matthewdenny
So just to be clear...
We are planning on using 1" diameter rollers with belts on them, and a 10fps drivetrain. We therefore are shooting for 15fps linear speed on the belts, which would mean a roller speed of ~3400 RPM. Does this seem right/plausible/safe?
*We are using 2" wide urethane orange belts with 3D printed crowned pulleys on the drive axle.
|
I have your RPM's at 3400. someone check my math. But that's fast. try a larger roller.
__________________
Currently: Coach FRC 1086/FTC 93
2006-2011 Coach FRC 2106/FTC 35
If you come to a FRC event to see a robot competition, you are missing the point.
Last edited by wilsonmw04 : 18-01-2017 at 11:17.
|