Quote:
Originally Posted by rbiguy12
Check that the pins on the carrier plate haven't moved. We had trouble with them popping out slightly and seizing in 2015 and ended up having to weld them in (Pretty sure VexPro suggested this when we contacted them). We used the v1's, but the v2's still don't have welded pins.
This was under pretty high torque though, which it sounds like yours aren't. Just a suggestion.
|
This was an issue we had last year as well, but we were also pushing their load limits. After speaking with several teams at worlds, and JVN, the most common recommendation was to weld the carrier plate pins so they couldn't slide out of the plate.