|
Re: Can't connect to the robot
If (1) the roboRIO is connected to the radio by Ethernet, and (2) you connect at the same time via USB and browse to the roboRIO webserver, and (3) the Ethernet address is 0.0.0.0, then the radio is not providing an IP address.
That usually means that the roboRIO is not detecting anything connected to the Ethernet connection.
Does the Ethernet connection on the roboRIO light up with the yellow & green status lights?
Is the roboRIO Ethernet connector plugged into the radio port closest to the power connector?
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 29-01-2017 at 10:37.
|