View Single Post
  #33   Spotlight this post!  
Unread 29-01-2017, 15:46
JamesCH95's Avatar
JamesCH95 JamesCH95 is offline
Hardcore Dork
AKA: JCH
FRC #0095 (The Grasshoppers)
Team Role: Engineer
 
Join Date: Dec 2004
Rookie Year: 2001
Location: Enfield, NH
Posts: 1,894
JamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond repute
Re: Intake Conveyor Ideal Speed

Quote:
Originally Posted by ImMoMo View Post
Good discussion,

I'm thinking that we're going to use a 10:1 Versa Planetary reduction with a 775 for our intake and elevator.

With 31 RPS, I think we'll be intaking fuel pretty fast.

Although I'm worried that we wont have enough power to lift palls up our elevator. Any experience with this?

Also, if we have wheels on our roller (1/2 shaft) how would I incorporate them into my calculations? Specifically on JVN.
Take your shaft speed (rev/s), multiply by wheel circumferential travel (ft/rev), and you'll get the collector 'surface speed' in ft/s. Compare to robot maximum speed, ...? Profit!
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.

Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
Reply With Quote