|
Re: WCP: 2017 Product Launch + MCC 2017
The Users guide and assembly instructions for the WCP 2 CIM Flipped DS are up!
R.C. also put in a link for a CAD of an encoder mount/adapter for the CTRE Mag Encoder. You can 3D print, or CNC, the encoder mount. Included with the mount is also a tool to set the depth of the magnet into the output shaft of the transmission. The intent of the tool us to use a small amount of CA glue to adhere the magnet in place. Just place the adhesive into the end of the shaft, then insert the magnet into the tool and use the tool to insert the magnet into the shaft. This will reduce the likelihood of accidentally gluing the tool shaft.
If you would like the original Inventor files, please send me a private message here and include your e-mail address.
In responce to a request, it should look like this when assembled.

__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
Last edited by billbo911 : 30-01-2017 at 15:48.
|