|
Re: 60 tooth 32 dp gear availability
Quote:
Originally Posted by pilleya
Careful, those gears especially the brass one have a very small face width. Brass is 0.0625" and the Steel in the top link is 0.1875" wide. The steel one might be workable, but the brass is definitely too thin. The narrow width is potentially the reason they are less than $20.
|
Good point. Probably should have linked to some that were more viable. But my point to the OP was really just to look at SDP-SI again. Unless they can go with plastic gears or some other workaround, they're not likely to find anything cheaper or quicker.
__________________
"It's taking longer than expected, which was to be expected."
|