View Single Post
  #7   Spotlight this post!  
Unread 01-02-2017, 14:28
fresh_prince fresh_prince is offline
Not allowed to navigate or DJ
AKA: Will Smith
FRC #3847 (Spectrum)
Team Role: Student
 
Join Date: Apr 2014
Rookie Year: 2013
Location: Houston
Posts: 23
fresh_prince is an unknown quantity at this point
Re: pic: Spectrum 3847 - 2017 CAD Model: Gamma Ray

Quote:
Originally Posted by flemdogmillion View Post
That arm on the front stays inside the maximum robot volume, right? It looks like you're going with the tall dimension set, and it also looks like lowering that arm is against the rules.
notmattlythgoe is correct, we are using the short configuration. We are 29x29 so we have room for a 4" extension off either side. The gear collector also fits within our bumper cutout.

See these photos for reference. The pic with the grey gear is current, the pic with the yellow gear is from an older revision, but demonstrates how the intake fits inside our front cutout.
__________________
AMDG, LTF

3847 - Spectrum | 2014-2017 | Student
Reply With Quote