|
Re: poly cord advice
Our team creates a jig to put together the two ends. We then cut the cord diagonally in order to create a larger connection surface. Heating is provided by a harbor freight heat gun. We've done this successfully in 3 out of the last 5 robots. The Bronc Botz have used polycord since 2012.
__________________
Gabe Guerrero
"Mr. Gabe"
Head Coach - Bronc Botz FRC 3481
Head Coach - Bronc Botz FTC 4008, 4602, 6976
Helotes, Tx
|