|
Code works well, but robot will not drive
Our lead programmer left last year so we are back to square 1. After hours of youtube videos, we made a new program. It is just a simple tank drive program with nothing else. We uploaded it to the robot and it gave us no errors, but the robot would not drive. We tried our program from last year and it worked. It may be an output problem for the motor id (port number) or something like that.
General programming help is also wanted. (we are currently using robot builder too)
We can also use raw code if anyone can help us with that.
Last edited by EliStevens12 : 02-02-2017 at 16:02.
|