I believe the D column button only shows up if it is downloaded as an Excel Document. Try that
As for the errors, the spreadsheet tests to see if each alliance has the same amount of various objectives that should be the same. For example, the number of Rotors Turning at the end of teleop (column T) should be the same for each robot in the alliance. So if T4, T5, and T6 are not equal it alerts the user as an error.
As for automating some of the data entry slots, for fuel, the idea behind not automating it is that it will be difficult to estimate the amount of fuel going into the boiler. Therefore it will be more reliable to insert that data in separately after the match is over instead of relying on estimations for Ranking Points.
Additionally, the number of rotors turning could be automated easily but I would personally prefer getting three numbers from three different scouters. If the three numbers are the same then the data is correct and if they are different then Blue Alliance can be consulted. Meanwhile totaling three different robot's gear totals leaves more room for error on the scouting end. If one gear total is incorrect then that can alter a teams' ranking drastically in the spreadsheet.
I hope I addressed all questions and comments. Thank you all for your support and advice!
