|
Re: H-Drive Strafing issues
We tried strafe with H-drive in 2015, using a hard chassis mount. No matter how high or low we put it, it never worked right. Off season, we used a pneumatic cylinder to apply a steady force to it, and it worked first try. Springs can also work, I understand. The force on that wheel should be roughly between 20% and 35% of the weight of your robot, depending on how much strafe force you want and how much forward drive force you're willing to give up while you strafe.
__________________
If you can't find time to do it right, how are you going to find time to do it over?
If you don't pass it on, it never happened.
Robots are great, but inspiration is the reason we're here.
Friends don't let friends use master links.
|