|
Re: LabVIEW Mecanum Programming
There are too many True constants feeding into the Open 4 Motor.
Without a vi snippet I can't tell what they are wired to though.
Offhand I don't think there should be any True constants wired in, but I'd have to double check that.
The Teleop looks okay.
How are the rollers on each wheel oriented?
The length of the rollers on the top of each of the four wheels should point in to the center of the robot.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 08-02-2017 at 19:11.
|