|
Re: new 1.1 compressor blowing 20A fuses
Quote:
Originally Posted by flemdogmillion
How much current can the PCM handle in powering the compressor?
|
The PCM has current limiting built in. It is rated for 17 amps continuous. It will allow more for the start up inrush. A bit of history: The older FRC compressors were famous for blowing fuses on the spike relay on start up. FRC allowed replacing the fuse with an 20 amp circuit breaker for that reason. I suspect you have a similar problem.
PCM tech specs here
__________________
If you don't know what you should hook up then you should read a data sheet
|