|
Re: new 1.1 compressor blowing 20A fuses
To the original post, only one PCM needs to be connected to the PDP output. A second PCM can be wired to a normal output of the PDP under R56. If you use a Spike relay, it can be wired directly to the PDP as long as it is controlled by the RoboRio. No PCM is used to power the compressor but one is needed for sensing the pressure switch.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|