Thread: Wiring Compressor
View Single Post
  #2   Spotlight this post!  
Unread 05-02-2002, 07:45
Lloyd Burns Lloyd Burns is offline
Registered User
FRC #1246 (Agincourt Robotics)
Team Role: Engineer
  
Join Date: Jun 2001
Rookie Year: 1997
Location: Toronto
Posts: 292
Lloyd Burns is an unknown quantity at this point
Do *not* cut the "PWM" cable's white wire.

You must route the signal from the pressure switch(es)via the Robot Controller (RC), and let the RC control the pump.

For a step by step, read this:

http://www.team188.com/cr/forum/tech...sages/71.shtml