|
I am planning a white paper detailing the shifter mechanism within the next two months. I will include gear ratios and main plates in the write up.
In the meantime, The approximate weight without motors is 5 lbs. This is only an estimate as I forgot to do a weight check.
The output speed at the shaft is 162/684 rpm for low/high. We reused the gear on the CIM and the sprockets from the output so this dictated some of the ratio decisions.
This box is 2-5/16" wide by 2-3/4" tall. I am guessing it to be about 7" long, I left the file at home. The plates are 1/4", the ouput bearings are not flanged so the button heads keep them in.
I have been running flat out the last few weeks at work so I am a little behind on everything. I will answer questions as fast as I can.
|