Many persons have asked about the dimensions on the goals.
Justin is working on a better list of measurements.
I have built both goals and have some insight:
1. Not all 3/4 plywood is 3/4. Did you know that if the plywood is from Canada it is metric and smaller by almost 1/16.
2. Not all 2 X 4 are 1 1/2 X 3 1/2. They vary as much as 1/8 depending upon the mill they were from.
This means that you may have to tweak your goal a little to get the desired effect.
Justin will post the exact model of caster from Home Depot. Casters vary as much as 1/8 in height and still be called 3" Casters.
Add to that the differences in fittings, even within the same box.
Please remember: If you build a robot that is critical to a dimension you may be in trouble because of the many variables. Design for a range of sizes. That is why all sizes as plus or minus 10 inches
