Thread: Help On Coding 2K1 Controller
View Single Post
  #4   Spotlight this post!  
Unread 04-12-2003, 00:37
Sachiel7's Avatar
Sachiel7 Sachiel7 is offline
<Yes I managed to flip it
AKA: Shayne Helms
FRC #1132 (RAPTAR Robotics)
  
Join Date: Sep 2002
Rookie Year: 2002
Location: Richmond, VA
Posts: 541
Sachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really nice
Send a message via AIM to Sachiel7
Re: Help On Coding 2K1 Controller
You might have bad joysticks. Unplug the connector to ensure all the pins are lined up right, and make sure it's plugged in all the way. If it is, then hook it up to a PC and setup a 3axis 2-button (I'm guessing you're using the joysticks from the kit) joystick. Test it's buttons. That *may* solve your problem. If it works on your PC, a few quick questions/points:
-Your OI connection might be bad...
- Which version of PBasic are you using?
- Are you using a y-cord?

Just to name a few. A list of your control setup might help. But as stated before, I think it's a problem with your inputs, not the programming.
__________________
-=Sachiel7=-

There's no such thing as being too simple!
Look for Team #1132, RAPTAR Robotics at the VCU Regional this year!