|
Of Course, it's OK. The things that come into play here is whether you can stand the added weight of #10 for this application, can you get it where it needs to go easily and can you get it attached to the motor without having it falling off during competition. We solder our connections where we can and a #10 wire on small motors can tend to rip the terminals off the motor if not secured to the motor housing. Dress them along the body of the motor and add a few tywraps.
Good Luck All
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Last edited by Al Skierkiewicz : 13-02-2002 at 17:05.
|