Quote:
|
Originally Posted by Tristan Lall
Since you're open to suggestions, maybe you could take a look at the Bosch 3360 (drill) motors from last year--I'd CAD them myself, but ours are in the robot in an inaccessible spot, and the robot is currently 150 km away.
I know you typically work in Inventor, but would it be possible (if you can find the time) to spin off a version in IGES assembly format?
|
I'll start with this motor and I'll publish as many models as I can in IGES. Thanks Tristan.
BTW you can get to the FirstCadLibrary at
http://66.78.7.229 on a temporary basis.