Whoops, my mistake:
not 60 METERS, 16x3= 48 METERS... Still works out to under $15 per meter.
Tim
Quote:
|
Originally Posted by Tim Skloss
We got the Pro kit... Since most of the cost (90%+) is in the extrusion, you could divide the cost by the total number of feet in the kit. The pro kit comes with 60 METERS of extrusion, that comes to about $10 per meter... pretty cheap in the long run!
I'll try to get a sheet from ITEM that specifies the cost per part and post it here.
Tim
|