Thread: Mounting Joysticks?
View Single Post
  #12   Spotlight this post!  
Unread 19-01-2004, 10:57
Sachiel7's Avatar
Sachiel7 Sachiel7 is offline
<Yes I managed to flip it
AKA: Shayne Helms
FRC #1132 (RAPTAR Robotics)
  
Join Date: Sep 2002
Rookie Year: 2002
Location: Richmond, VA
Posts: 541
Sachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really niceSachiel7 is just really nice
Send a message via AIM to Sachiel7
Re: Mounting Joysticks?
Well, if you don't want it permanent, then I would have to say (larger) velcro would be the way to go. If you do want it permanent, drill out a few holes in-between the screws holding the base of the stick to the top. On whatever you're mounting it to, drill out holes for the screws holding the base on, and the holes you just made. Unscrew the base and bolt it onto your plate through the newer holes, then screw the base back onto the top through the remaining holes in your plate. We've used it for 3 years, no prob.
__________________
-=Sachiel7=-

There's no such thing as being too simple!
Look for Team #1132, RAPTAR Robotics at the VCU Regional this year!