We are TRYING to build team 116's transmission... and after much much hair pulling out I have found everything but the little oddball .7 module 55 tooth gear that is listed as msg25-55 (55 tooth). pic has no record of this gear, however they do have an msg25-56(56 tooth) listed. Was it a typo that 55 was used insted of 56. could an 7.5(edit ment 7.5) module gear be used to mate with the drill pinion? and does anybody know of a gear manufacturer that could supply one that can ship faster than 2 weeks (which i think is rediculous SP). basically im tired of fooling with this ordering stuff and I want to get to building this thing. I have look for the gear at mcmaster,grainger,msc, boston, martain, brown, sdp, small parts, berg, motion industries, everywhere... any help would be appreciated... *pulls out last of hair* (/rant)
(guess I should have also said that the plans call for an 55 tooth gear, whereas there is an 56 avaliable... i think were just going to order the 56 tooth, and if it comes in soon then we will use it.. if not.. well run drills alone and have it for next year)