|
Re: Who is missing stuff from KOP?
Blue Box:
Control System accessories:
- Relay Module (spike)
missing 4
- Power Supply for Operator Interface missing 1
- Speed Controller (victor 884) missing 4
Control System Box:
- Radio Modem for Robot Controller missing 1
- Radio Modem for Operator Interface missing 1
- Robot Controller missing 1
- Operator Interface missing 1
Sensor Bag:
- Ir Beacon- victor board missing 1
- Current Sensor – Tantalem Capacitors missing 2
- Ir Beacon- Fet’s missing 2
- Ir Beacon Led’s missing 10
- Ir Beacon- resistors missing 8
- Ir Beacon – 3pin connectors missing 2
- Current Sensor missing 2
- World Beam Diffuse sensor w/screws missing 2
- Ir Beacon- photo detector (receiver) missing 5
- Current Sensor- Printed Circuit Board missing 2
Pneumatics – SMC:
- Pneumatics Kit, double solenoid base ported valve, SMC missing 2
- Pneumatics Kit, flow control, SMC missing 6
- Pneumatics Kit, fitting, straight ¼” tube, SMC missing 20
- Pneumatics Kit, fitting, 90 Elbow 1/” tube, SMC missing 20
- Pneumatics Kit, Tee Union ¼” tube, SMC missing 5
- Pneumatics Kit, Fitting, Male Run T 1/8 npt~1/4 tube SMC missing 5
- Pneumatics Kit, ¼” OD tubing, SMC missing 1
Seat/Window Bag:
- Nippon-Denso Motor, Window, Right missing 2
SEPARATE BOX:
1. Documentation Bag:
- FedEx Pouches
missing 2
- Discovering Fluid Power CDROM
missing 1
RED BOX:
1. Loose:
- Valve- Single Solenoid missing 1
I think that we were the only team that didnt recieve anything for controlls.
|