Thread: how do i tell to the edurc when the remote is on.
View Single Post
  #3   Spotlight this post!  
Unread 28-01-2004, 11:04
Kyokuzen Kyokuzen is offline
Registered User
#0148 (Robowranglers)
  
Join Date: Oct 2003
Location: Greenville, TX
Posts: 1
Kyokuzen is an unknown quantity at this point
Re: how do i tell to the edurc when the remote is on.
If the remote is off, or there is no receiver plugged into the EDU RC, all PWM in values will be 127.

If you are getting all 127s, you can't really tell if there is no PWM input, or if your remote is on but everything is perfectly centered. But perhaps you could trim your remote slightly off center, but still within the deadband (128 or 129, for example) and program your RC so that it knows that perfect 127s represent transmitter off, but that anything else represents transmitter on.