Thread: PID control loop/Encoder question
View Single Post
  #7   Spotlight this post!  
Unread 29-01-2004, 00:01
Rickertsen2 Rickertsen2 is offline
Umm Errr...
None #1139 (Chamblee Gear Grinders)
Team Role: Alumni
  
Join Date: Dec 2002
Rookie Year: 2002
Location: ATL
Posts: 1,421
Rickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant futureRickertsen2 has a brilliant future
Send a message via AIM to Rickertsen2 Send a message via Yahoo to Rickertsen2
Re: PID control loop/Encoder question
Quote:
Originally Posted by Larry Barello
The 2004 controller seems capable of handling at least 5000 counts/sec with two encoders. I am using PORTB interrupt lines (change of state interrupt) and two four stripe encoders (home made) on the shaft of the Bosch. At ~20krpm the encoders give about 5000 counts/sec.

I did some experiments with a super fine resolution encoder and at about 100k counts/sec the IFI system locked up

Anyway, 5k/sec is about right. It gives ~150 counts/26ms loop at top speed.
Yes, but what else are you doing in the background?
__________________
1139 Alumni