Quote:
|
Originally Posted by Biff
Depending on how you plumb the hoses you will just send the piston the other direction. You are going to have to test things or figure them out by drawing the air flows in each state for the valve wiht power on and off. The short answer to your question is no.
|
This is wrong. With this you could definitely do this. You can program the limit switch to change the single solenoid to its stopped state and stop the cyclinder. Yes, this would work. Any questions about set-up of the pneumatic parts refer to my diagram or ask me. The pistons will stop if you do it right, thus multi-positioning.