Quote:
|
Originally Posted by ngreen
This is wrong. With this you could definitely do this. You can program the limit switch to change the single solenoid to its stopped state and stop the cyclinder. Yes, this would work. Any questions about set-up of the pneumatic parts refer to my diagram or ask me. The pistons will stop if you do it right, thus multi-positioning.
|
We are both right to a point, I took the original question as to just cutting off the power to the "memory" solenoid. If that was the case I was correct in saying that it would nor work. You are correct if it is a single action soleniod working with the "memory" soleniod. All you are using the switch for is to let the program know when to cut the air at the single solenoid. Peace.