Thread: Do we need to use the gnd stud and MAXI fuse block
View Single Post
  #2   Spotlight this post!  
Unread 04-02-2004, 10:49
KenWittlief KenWittlief is offline
.
no team
Team Role: Engineer
  
Join Date: Mar 2003
Location: Rochester, NY
Posts: 4,213
KenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond reputeKenWittlief has a reputation beyond repute
Re: Do we need to use the gnd stud and MAXI fuse block
you are required to use the large fuse block and the 40 amp fuses for the chalupa and drill motors

If you dont use the ground stud you will have to branch the ground from one fuse block to the second one - you would be better off using it, but Im not sure if thats required.

BTW -you really dont want to run the chalupias or the drill motors on 30 amp breakers - that limits the amount of power they can draw, and when push comes to shove in a match, they will open on you at a much lower power level

power = current times voltage

30 amps * 12 volts = 360 watts
40 amps * 12 volts = 480 watts

since you are using two motors, that means the power available to your drive train will be either 720 Watts with the 30 amp breakers, or 960 watts with the 40 amp breakers

33% more power - its worth the extra space and weight to have the maxi panel on your bot.
Last edited by KenWittlief : 04-02-2004 at 11:07.