Quote:
|
Originally Posted by Kris Verdeyen
The main problem you have is that hobby servos won't make a full rotation. They tend to be limited to around 180 degrees, and have no internal feedback to allow you to know when they've reached their holding point, so you'd need an external limit switch to feed that back, and let the code know when to reverse.
|
We don't want the servo to rotate more then it is doing right now.But we were wondering if servos can be made to rotate backwards. This is because everytime you make it turn you have to manually twist it back to its starting position to make it turn again.
So can the servos actually be made to move backward, if so what type of signal or the code should you use.
As far as what i have researched and what you just said about their limit of 180 degrees matching, and the only way to modify would to be to take it apart and modify it internally ?? right..
your help is appreciated, this is my first year on the competition so do forgive me if these are newbie questions
thanks