Quote:
|
Originally Posted by Ian311
we need the code for the new joysticks.
|
As in user_routines.c, Default_Routine()
change:
Code:
/*---------- 1 Joystick Drive ----------------------------------------------
*--------------------------------------------------------------------------
* This code mixes the Y and X axis on Port 1 to allow one joystick drive.
* Joystick forward = Robot forward
* Joystick backward = Robot backward
* Joystick right = Robot rotates right
* Joystick left = Robot rotates left
* Connect the right drive motors to PWM13 and/or PWM14 on the RC.
* Connect the left drive motors to PWM15 and/or PWM16 on the RC.
*/
pwm13 = pwm14 = Limit_Mix(2000 + p1_y + p1_x - 127);
pwm15 = pwm16 = Limit_Mix(2000 + p1_y - p1_x + 127);
to
Code:
/*---------- 2 Joystick Drive ----------------------------------------------
pwm13 = pwm14 = p3_y;
pwm15 = pwm16 = 254 - p4_y; // or p4_y if your motors are rigged to both run forward
?