[Al Skierkiewicz]

Originally Posted by Just3D

My question is this: Is there a way for the first Victor to remember its calibration, or should I just replace it entirely with another Victor? It still works just fine, its only the calibration that is off (of course, this won't help on the field).

Thanks in advance for the advice.

Just,
It sounds like you have a bad speed controller. It is supposed to remember calibration so the intenal memory must be bad. You won't be able to calibrate during competition and you have already fixed the problem by replacing the speed controller. You weren't making metal filings by drilling or such? Metal flakes falling into the speed controllers will damage them and that is not covered under warranty. Check with Innovation First for replacement.