Quote:
|
Originally Posted by Al Fielder
...
If you choose to press a replacement gear on the shaft of a somewhat similar number of teeth (but different pitch), stay with a .0002-.0005 interference fit (press). If you go much tighter, you may yield the gear and you could easily lose the press i.e the gear now spins on the shaft.
Good luck
|
How does one get a .0005 interference fit with the replacement gear? Are metric reamers sized .02mm under readily available? Where would I find such a tool?
Basically, I got .7 mod gears from PIC-Design to mate the Bosch to the rest of the gearbox, but I am having fits trying to get the spacing correct. No such problems with the 20dp gears from Martin Sprocket...